Verilink WANsuite 5330 (34-00302.F) Product Manual Manual de usuario Pagina 20
- Pagina / 135
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
1-6 WANsuite 5330
The WANsuite 5330 front panel LED status indicators are described in the
table below.
The user-activated input control buttons on the WANsuite 5330 are described
in the following table.
*The CONFIG button must be held until the MODE LED lights amber and remains illuminated for the
default configuration to take effect.
Indicator Description
MODE
Normally, the MODE indicator lights green.
This indicator lights amber while configuration is being set by
the front panel buttons or when the configuration is changed by
SNMP or through the Web server interface. The indicator will
remain amber until the changed configuration is saved; it will
revert to green when the new configuration has been saved.
NET
The NET indicator is off (not illuminated) when the port has not
been configured.
The indicator lights red if the DDS link is down or when a
connection has not yet been established.
The indicator lights green when the DDS link is operational and
the configured protocol is established.
The indicator lights amber if the DDS link is operational but at
least one configured frame relay service is down.
SERIAL
The SERIAL indicator is off (not illuminated) when the port has
not been configured.
This indicator lights green when DTR is active and the
configured protocol is established.
The indicator lights red when DTR is not active and the
configured protocol is not established.
The indicator lights amber when DTR is not active or the
configured protocol is not established.
ALARM
The ALARM indicator is off (not illuminated) when no alarm
conditions exist.
The indicator lights amber to indicate an OOF alarm. (Other
alarms may also be active.)
The indicator lights red for all other alarm conditions.
POWER
The POWER indicator lights green when power is applied to
the unit.
The indicator lights amber in test modes (Port looped or BERT
active).
Button Description
RESET
The RESET button provides a hardware reset to the unit.
CONFIG
The CONFIG button sets the unit back to its factory default
configuration for Packet Mode operation; this is the same as a
maintenance reset. To initiate this function, you must press and hold
the
CONFIG button during a power-up sequence.*
- WANsuite 1
- Reference Manual 1
- Canadian Emissions 3
- Requirements 3
- Table of Contents 5
- Chapter 4 VT100 Interface 7
- Appendix A Specifications 8
- Appendix B SNMP Agent 9
- About this Manual 11
- Typographic Conventions 12
- Support from Verilink 12
- Returning a Unit to Verilink 13
- C HAPTER 15
- Performance 16
- SNMP Management 16
- • End-to-end Integrity 17
- • PVC Delay Testing 17
- Features Summary 18
- • Frame Relay Aware: 19
- 1-6 WANsuite 5330 20
- Supervisory Port 21
- 10/100 Ethernet 21
- Ethernet LED Indicators 21
- Serial Interface 22
- Network Interface 22
- Power Connection 22
- Power Failure 23
- 1-10 WANsuite 5330 24
- NSTALLATION 25
- Installation Wizard 26
- Installation 2-3 27
- 2-4 WANsuite 5330 28
- Layout of Interface Screens 29
- Unit Screen 30
- Web Server Interface 3-3 31
- Figure 3.2 32
- Network Screen 33
- 3-6 WANsuite 5330 34
- Serial Screen 35
- 3-8 WANsuite 5330 36
- Web Server Interface 3-9 37
- Current Pin Status 38
- Figure 3.7 39
- Supervisory Screen 40
- Adding a Service 41
- Service Details Screen 42
- Interface Details Button 43
- Type Details Button 43
- Delete Service Button 43
- TDM Screens 43
- Channel Table Details Screen 43
- Web Server Interface 3-17 45
- 3-18 WANsuite 5330 46
- Status and Alarms Table 47
- Transmit: 48
- Receive: 48
- PPP Service Details Screen 49
- IP Services Screen 55
- 3-30 WANsuite 5330 58
- 3-32 WANsuite 5330 60
- DLCI Status Table 61
- Figure 3.27 65
- 3-38 WANsuite 5330 66
- Figure 3.28 67
- Software Upgrade 73
- Software Upgrade Screen 74
- Save/Upload 75
- Password 75
- In-band Management 76
- WANsuite 5330s 77
- 3-50 WANsuite 5330 78
- Screen Components 79
- Cursor Controls 80
- Field Types 80
- Menu Structure 81
- VT100 System Screen 82
- Field Description 82
- Prompt Function 82
- New Password 83
- Maintenance Reset 83
- Save and Restart 84
- 4-10 WANsuite 5330 88
- Ethernet (IP Details) Screen 89
- Supervisory Config Screen 90
- Supervisory Config Screen 91
- VT100 Interface 4-17 95
- 4-18 WANsuite 5330 96
- Transmit 98
- 4-22 WANsuite 5330 100
- Parameters To Negotiate 101
- PPP Statistics 102
- PAP Table 102
- CHAP Table 103
- IP Service Details Screen 104
- Endpoint Table Screen 104
- Endpoint Details Screen 105
- 4-28 WANsuite 5330 106
- DLCI Details Screen 107
- 4-30 WANsuite 5330 108
- VT100 Interface 4-31 109
- 4-32 WANsuite 5330 110
- DLCI Statistics Screen 111
- DLCI Table Screen 112
- Service Aware Screen 112
- Rule Config Screen 113
- 4-36 WANsuite 5330 114
- SNMP Details Screen 115
- Diagnostics Screen 116
- Test Details Screen 117
- BERT Table 118
- NOTICE: The 2 118
- Trap Log Screen 119
- Top Talkers Screen 120
- VT100 Interface 4-43 121
- 4-44 WANsuite 5330 122
- PECIFICATIONS 123
- Per Port 124
- Industry Listings 125
- Standards 125
- Ordering Information 126
- Optional Equipment 126
- Connector Pin Assignments 127
- Function Abbrev. Direction 128
- DB-25* RS-232 V.35 EIA-530 128
- Pin Ethernet Interface 128
- DDS Network 129
- Interface 129
- Pin DCE Mode DTE Mode 129
- A-8 WANsuite 5330 130
- A PPENDIX 131
- SNMP Trap Configuration 132
- SNMP Agent B-3 133
- B-4 WANsuite 5330 134
Relacionado con productos y manuales para Hardware De La Computadora Verilink WANsuite 5330 (34-00302.F) Product Manual
Hardware De La Computadora Verilink WANsuite 5230 (34-00304.F) Product Manual Manual de usuario
(233 paginas)
(233 paginas)
Hardware De La Computadora Verilink WANsuite 5650 (34-00314.E) Product Manual Manual de usuario
(68 paginas)
(68 paginas)
Hardware De La Computadora Verilink WANsuite 5370 (34-00310.D) Product Manual Manual de usuario
(235 paginas)
(235 paginas)
Hardware De La Computadora Verilink WANsuite 6x30 (34-00315.B) Product Manual Manual de usuario
(181 paginas)
(181 paginas)
Hardware De La Computadora Verilink WANsuite 6450 (34-00326) Product Manual Manual de usuario
(205 paginas)
(205 paginas)
Hardware De La Computadora Verilink 1024 Chassis (CG) Configuration/Installation Guide Manual de usuario
(2 paginas)
(2 paginas)
Hardware De La Computadora Verilink 1040 Power Shelf (CG) Configuration/Installation G Manual de usuario
(1 paginas)
(1 paginas)
Hardware De La Computadora Verilink 1041 (CG) Configuration/Installation Guide Manual de usuario
(2 paginas)
(2 paginas)
Hardware De La Computadora Verilink 1042 (CG) Configuration/Installation Guide Manual de usuario
(2 paginas)
(2 paginas)
Hardware De La Computadora Verilink 1050 (CG) Configuration/Installation Guide Manual de usuario
(2 paginas)
(2 paginas)
Hardware De La Computadora Verilink 1051-1 Chassis (CG) Configuration/Installation Gui Manual de usuario
(2 paginas)
(2 paginas)
Hardware De La Computadora Verilink 1051-2 Chassis (CG) Configuration/Installation Gui Manual de usuario
(2 paginas)
(2 paginas)
Hardware De La Computadora Verilink 1060 Broadcast Card (CG) Configuration/Installatio Manual de usuario
(2 paginas)
(2 paginas)
Hardware De La Computadora Verilink 1060A Broadcast Card (CG) Configuration/Installati Manual de usuario
(2 paginas)
(2 paginas)
Hardware De La Computadora Verilink 1061 Multicast Card (CG) Configuration/Installatio Manual de usuario
(2 paginas)
(2 paginas)
Hardware De La Computadora Verilink WANsuite 7205 (34-00317.B) Product Manual Manual de usuario
(221 paginas)
(221 paginas)
Hardware De La Computadora Verilink 1200 Rack Pwr Spply (IG) Configuration/Installatio Manual de usuario
(2 paginas)
(2 paginas)
Hardware De La Computadora Verilink 1251 (CG) Configuration/Installation Guide Manual de usuario
(2 paginas)
(2 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.032 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales