
Downloading and Broadcasting Firmware
6-14 Verilink SCM
After a download, the target module cannot be downloaded again
until that module has been restarted (either in the A bank or in the
B bank).
NOTE:
Do not attempt to do a switch over before the download has
completed. The module may be left inoperative.
NOTE:
Only modules using the SCM Braodcast request will switch
over using this feature. Modules downloaded by target
download may not be switched over using the option
O)
switchover to bank A/B
.
Alternatively, you may navigate to a specific module and reset it
individually.
From the
Main Menu
, select the module you wish to restart (in this
example, a QUAD T1 module which received the firmware
download):
[0.0.0.0] [1,1] SCM > s
You are prompted:
Enter ‘shelf,slot’ pair or ‘slot’ in current shelf(e.g. 3,4 or 5): > 4
Select the option for node administration:
O
[0.0.0.2] [1,4] QUAD T1 > o
The
QUAD T1 Administration Menu
appears:
Figure 6-11 QUAD T1 Administration Menu
From the
QUAD T1 Administration Menu
, select the command
option for:
Y) switch over once
-- SCM CONTROLLER ADMINISTRATION MENU --
-- SCM CONTROLLER ADMINISTRATION MENU ---- SCM CONTROLLER ADMINISTRATION MENU --
-- SCM CONTROLLER ADMINISTRATION MENU --
Date/Time/Zone: 09-17-98 01:58:14
Date/Time/Zone: 09-17-98 01:58:14Date/Time/Zone: 09-17-98 01:58:14
Date/Time/Zone: 09-17-98 01:58:14
Node address: [0.0.0.2]
Node address: [0.0.0.2]Node address: [0.0.0.2]
Node address: [0.0.0.2]
Node id: 15
Node id: 15Node id: 15
Node id: 15
Site name: site10
Site name: site10Site name: site10
Site name: site10
System uptime: 00:09:16
System uptime: 00:09:16System uptime: 00:09:16
System uptime: 00:09:16
-- QUAD T1 -- CARD ADMINISTRATION -- [00,04] --
-- QUAD T1 -- CARD ADMINISTRATION -- [00,04] -- -- QUAD T1 -- CARD ADMINISTRATION -- [00,04] --
-- QUAD T1 -- CARD ADMINISTRATION -- [00,04] --
O) switch over permanent
O) switch over permanentO) switch over permanent
O) switch over permanent
Q) query firmware
Q) query firmwareQ) query firmware
Q) query firmware
R) reset card
R) reset cardR) reset card
R) reset card
X) exit this menu
X) exit this menuX) exit this menu
X) exit this menu
A [0.0.0.2] [0,4] QUAD T1 >
A [0.0.0.2] [0,4] QUAD T1 >A [0.0.0.2] [0,4] QUAD T1 >
A [0.0.0.2] [0,4] QUAD T1 >
Comentarios a estos manuales