Verilink SCM (880-503300-001) Product Manual Manual de usuario Pagina 21

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 83
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 20
Verilink SCM 2-1
Chapter
2
SCM Quick Set-Up
This chapter outlines the basic flow of procedures and options for
getting an SCM up and running.
Installation
The SCM boots fastest if it is located in shelf 0, slot 1. Insert the
NIM 3000 first, then the SCM.
Craft Interface
Connecting to the Craft interface: see Chapter 3, “Craft Interface”,
or the Craft Interface Manual.
Administration
Menu
The SCM
Administration Menu
is used to set the system
parameters, see Chapter 4, Administration Menu”.
System Parameters
The following parameters must be set before proceeding:
Shelf type, see page 4-6, “Set Shelf Type”
Site name, see Table 4-2, “Administration Menu Commands”
Time/date/zone, see Table 4-2, “Administration Menu
Commands”
Passwords (optional), see page 4-7, “Using Passwords”
Node Manager
Set the node address and node ID see “Administration Menu
Commands”.
SNMP, Telnet, or
SLIP Access
SNMP, FTP or Telnet can be used through an Ethernet or SLIP
connection. If SNMP, Telnet, or SLIP is used to manage the node, set
the TCP/IP parameters. See page 4-10, “TheTCP/IP Configuration
Menu”.
Configuring
Local Modules
From SCM, Craft, SNMP MoM, or Node Manager, configure the ports
after the system parameters have been set and before building any
circuits.
Circuit Build
Build the desired circuits between modules, see Chapter 5, “Circuit
Manager”.
Vista de pagina 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 82 83

Comentarios a estos manuales

Sin comentarios