Verilink Red Zone Encryption (REMS) (880-502423-001) Produc Manual de usuario descargar pdf (Pagina 92)

Installing and Replacing Plug-in Modules

10-2

Red Zone Encryption Management System (REMS) User Manual

Figure 10-1 Front Module and Rear Connector Module Installation in a Dual-line Shelf, Top View

The 128-pin female connector J1 side of the rear connector module

should be facing to the interior of the shelf. Its rear connector panel

should be facing to the outside rear of the shelf.

4. Insert the rear connector module into the slot 1 position of the dual-

line shelf so that the rear connector module seated with rear panel is

flush with the rear panel of the shelf. Make sure it is squarely

aligned. Seat it by gently pushing it all the way in until it stops and

you can hand start the thumbscrews.

5. Secure the rear connector module by tightening the two thumbscrews

on the rear panel as shown in Figure10-2, Securing a Rear Connector

Module into a Dual-line Shelf Using the Thumbscrews.

Dual-line shelf

(Top View)

CIM Module

Front module

Dual-line shelf Front

Shelf

Slot 2 position

Mating backplane connecto

Shelf 0, slot1 position

Panel

Backplane

Thumbscrews

Front module

1 2 ... 87 88 89 90 91 92 93 94 95 96 97

Sin comentarios

Verilink Red Zone Encryption (REMS) (880-502423-001) Produc Manual de usuario Pagina 92