Verilink AS56/56Plus (896-502588-001) Product Manual Manual de usuario descargar pdf (Pagina 41)

Configuration Parameters

AS56 and AS56

Plus

User Manual

3-17

Access Syst em56 will provide both TX-clock and RX-clock to the

customer DTE.

External should be used with the Serial Port if the attached user

equipment is DCE, rather than DTE. With external timing, the user’s

DCE must be used as the system’s master clock. See Timing Source

(item #16, above). The “external clock” is the “External Timing” pin

on the interface.

The External setting requires special user cabling and a very specific

configuration for the user DCE. Please refer to Appendi xC,

Special

Serial Port Cabling

for more information.

The Int/Ext setting may require a special DTE configuration or a

modified cable. Please refer to Appendi xC,

Special Serial Port

Cabling

for more information.

31. Serial Port Remote Loop Enable/Disable.

Depress

SELECT

to choose between Ye s (Enabled) and No

(Disabled).

When Enabled, this Serial Port channel will respond to receipt of a

remote digital loop command arriving from the Serial Port channel of

the mated Access Syst em56 unit. Enabled is recommended unless

the user has specific reason to do otherwise.

When Disabled, this Serial Port channel will not respond to receipt

of a remote digital loop command.

Serial Port

Rem Loop:_Yes

DOWN

display:

Configuration

__Serial Port

END

to display:

Main Menu HH:MM

__Configuration

END

to display:

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 129 130

Comentarios a estos manuales

Sin comentarios

Verilink AS56/56Plus (896-502588-001) Product Manual Manual de usuario Pagina 41

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Verilink AS56/56Plus (896-502588-001) Product Manual