Verilink PRISM 4151 (34-00258) Product Manual Manual de usuario descargar pdf (Pagina 39)

SNMP Agent C-5PRISM 4151

ddsDteNoAlarm(1)

- DTE interface has no current

alarms

ddsDteDtrAlarm(2)

- DTE interface has currently

declared a loss of DTR alarm

ddsDteInterfaceType:

(read- only)

Reports the DTE interface type being used

ddsDteInterfaceV35(1)

- DTE interface is a V.35

ddsDteInterface232(2)

- DTE interface is a RS232

ddsDteInterfaceOther(3)

- DTE interface is something

other than listed above

ddsDteInterfaceNotAvail(4)

- DTE interface type is not

available

ddsDteV54Loop:

(read- write)

Allows you to select or verify the operational state of the

V.54 option

ddsDteV54LoopEnabled(1)

- The unit will currently

respond to V.54 loop codes

ddsDteV54LoopDisabled(2)

- The unit will not respond

to V.54 loop codes

ddsDteRtsCtsDelay:

(read- write)

Allows you to verify or select the delay used in the transi-

tion time on RTS and CTS. For the PRISM 4151, only the

ddsDteRtsCtsDelayNormal

and

ddsDteRtsCtsDelayLong

option are valid.

ddsDteRtsCtsDelayOff(1)

- Delay is turned off

ddsDteRtsCtsDelayNormal(2)

- Delay is a normal

amount based on the data rate and the hardware

ddsDteRtsCtsDelayLong(3)

- Delay is generally doubled

from the normal delay

ddsDteRtsCTSDelayUserDefined(30)

- Delay has been

user defined to some other value, when this value is set

the delay is set to 30ms

ddsDteRtsStatus:

(read- only)

Reports the current status of the RTS control lead

ddsDteRtsStatusHigh(1)

- RTS control lead is in the

active HIGH state

ddsDteRtsStatusLow(2)

- RTS control lead is in the

active LOW state

ddsDteCtsStatus:

(read- only)

Reports the current status of the CTS control lead

ddsDteCtsStatusHigh(1)

- CTS control lead is in the

active HIGH state

ddsDteCtsStatusLow(2)

- CTS control lead is in the

active LOW state

ddsDteDcdStatus:

(read- only)

Reports the current status of the DCD control lead

ddsDteDcdStatusHigh(1)

- DCD control lead is in the

active HIGH state

ddsDteDcdStatusLow(2)

- DCD control lead is in the

active LOW state

ddsDteDtrStatus:

(read- only)

Reports the current status of the DTR control lead

ddsDteDtrStatusHigh(1)

- DTR control lead is in the

active HIGH state

ddsDteDtrStatusLow(2)

- DTR control lead is in the

active LOW state

ddsDteDsrStatus:

(read- only)

Reports the current status of the DSR control lead

ddsDteDsrStatusHigh(1)

- DSR control lead is in the

active HIGH state

ddsDteDsrStatusLow(2)

- DSR control lead is in the

active LOW state

ddsDteDsrControl:

(read-write)

Allows you to review and configure the DTE DSR lead (Cir-

cuit 107/CC)

ddsDteDsrControlTestOff(1)

- DSR is on except when

the unit is in test

ddsDteDsrControlForcedOn(2)

- DSR is on regardless

of any unit condition

ddsDteDcdControl:

(read-write)

Allows you to review and configure the DTE DCD lead

(Circuit 109/CF).

ddsDteDcdControlIdleOff(1)

- DCD is on except when

the unit is receiving Idle Code from the network.

ddsDteDcdControlForcedOn(2)

- DCD is on regardless

of any unit condition

ddsDteRtsControl:

(read-write)

Allows you to review or configure the DTE RTS and CTS

leads (Circuit 105/CA and 106/CB).

ddsDteRtsControlNormal(1)

- RTS, Circuit Assurance,

and Antistreaming control CTS

ddsDteRtsControlForcedOn(2)

- RTS is ignored, CTS is

on regardless of any unit condition

ddsDteDtrAlarm:

(read-write)

Allows you to enable or disable monitoring on the DTR lead

(Circuit 108/CD).

ddsDteDtrAlarmEnabled(1)

- DTR low is an alarm con-

dition

ddsDteDtrAlarmDisabled(2)

- DTR is ignored

ddsDteRLDetect:

(read-write)

Allows you to override the DTE RL input pin on the

Remote Loopback lead (Circuit 140/RLB)

ddsDteRLDetectEnabled(1)

- RLB high activates the

Remote V.54 Loop

ddsDteRLDetectDisabled(2)

- RLB is ignored

ddsDteLLDetect:

(read-write)

1 2 ... 34 35 36 37 38 39 40

Comentarios a estos manuales

Sin comentarios

Verilink PRISM 4151 (34-00258) Product Manual Manual de usuario Pagina 39

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Verilink PRISM 4151 (34-00258) Product Manual