Verilink PRISM 3301 (34-00239.5) Product Manual Manual de usuario descargar pdf (Pagina 38)

30 APPENDIX A: MIB REFERENCE

RFC 1407 MIB

RFC 1407 is used to manage DS3/E3 interfaces, and in this case, a T3 interface.

The following lists the objects that the 3301 supports.

dsx3ConfigTable

{ 1.3.6.1.2.1.10.18.6 } Implementation of the Near End Configuration Table is

mandatory for all systems attached to a DS3/E3 interface.

Object Name Object ID

User

Access Object Description Get / Set

dsx3LineIndex dsx3ConfigEntry 1 read-only This object is the identifier of a

DS3/E3 interface on a managed

device. If there is an ifEntry

directly associated with this and

only this DS3/E3 interface, it

should have the same value as

ifIndex. Otherwise, number the

dsx3LineIndices with a unique

identifier following this rule:

inside interfaces (e.g., equipment

side) with even numbers and

outside interfaces (e.g., network

side) with odd numbers.

Returns the ifIndex of the specified

DS3/E3 interface.

dsx3IfIndex dsx3ConfigEntry 2 read-only The value for this object is equal

to the value of ifIndex from the

Interfaces table of MIB II (RFC

1213).

Returns the ifIndex of the specified

DS3 interface.

dsx3TimeElapsed dsx3ConfigEntry 3 read-only The number of seconds that have

elapsed since the beginning of the

near end current

error-measurement period.

dsx3ValidIntervals dsx3ConfigEntry 4 read-only The number of previous near end

intervals for which valid data was

collected. The value will be 96

unless the interface was brought

online within the last 24 hours, in

which case the value will be the

number of complete 15 minute

near end intervals since the

interface has been online.

dsx3LineType dsx3ConfigEntry 5 read-write This variable indicates the variety

of DS3 C-bit or E3 application

implementing this interface. The

type of interface affects the

interpretation of the usage and

error statistics. The rate of DS3 is

44.736 Mbps and E3 is 34.368

Mbps. The dsx3ClearChannel

value means that the C-bits are not

used except for sending/receiving

AIS.

4 - dsx3CbitParity (ANSI

T1.107a-1989)

dsx3LineCoding dsx3ConfigEntry 6 read-write This variable describes the variety

of Zero Code Suppression used on

this interface, which in turn affects

a number of its characteristics.

dsx3B3ZS and e3HDB3 refer to

the use of specified patterns of

normal bits and bipolar violations

which are used to replace

sequences of zero bits of a

specified length.

dsx3B8ZS(2)

- the Network Coding

is set to B8ZS.

dsx3HDB3(3)

- Network coding is

set to HDB3

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 49 50

Comentarios a estos manuales

Sin comentarios

Verilink PRISM 3301 (34-00239.5) Product Manual Manual de usuario Pagina 38

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Verilink PRISM 3301 (34-00239.5) Product Manual