
24 CHAPTER 3: OPERATION
This allows scrolling through the options available for that function using the
arrow keys. Pressing Select again sets that parameter. Pressing Exit returns the
cursor to the left. The cursor does not appear when status-only elements are
displayed.
To return to the previous screen without changing a parameter, press Exit. Do not
press Select. Pressing Exit again returns the previous screen.
Main Menu
Display
The Main Menu screen is the first level of user-accessable functional menus
available. To activate any of these menus or submenus, use the methods described
in Menu Components on page 23.
The Main Menu diagram is shown in Figure 3-5. The section and page numbers
are provided to refer to a specific topic.
T1 NET
Configuration
The T1 NET Configuration screen allows the following network configuration
parameters to be set.
Defaults are shown underlined.
Figure 3-5 Main Menu
MAIN MENU
Log OffLog On
T1 NET
Configuration
(page 24)
T1 DTE
Configuration
(page 27)
DTE Port
Configuration
(page 28)
Voice Port
Configuration
(page 32)
SNMP
Configuration
(page 34)
Diagnostics
(page 36)
System
Utilities
(page 41)
Figure 3-6 T1 NET Configuration Menu
Framing
Type
Line
Code
Line
Build
Out
Timing
ESF
D4
AMI
B8ZS
0 dB
-7.5 dB
-15 dB
-22.5 dB
Internal
Network
T1 DTE
Station
Slot X /Port Y,
(where
X = 2 or 3
and
Y = A or B)
Station
Input
Timing
1.544
MHz
N×56 K
N×64 K
(Station
Timing
must be
selected)
Zero
Suppress
Enable
Disable
PRM
Enable
Enable
Disable
Alarm
Thresholds
Station
Timing
Selects the
N
multiplier
(1 - 24)
for the
Input
Timing.
Alarm Reset 030
ES 045
SES 005
LOSS 005
OOFS 005
UAS 000
RAS 000
AISS 000
BPVS 000
T1 NET Configuration
Line Code ............. AMI
<
igure 3-7 T1 NET Configuration Screen
Comentarios a estos manuales