Verilink PRISM 3002 (34-00277) Product Manual Manual de usuario Pagina 15

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 52
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 14
Port Connections
2-3
Data Port The Data Port provides connection to the customer equipment. Pinouts for the
backplane connector and both high-speed port interfaces are listed in Table 2-4.
Default settings route all available DS0s to the DTE port.
FCC rules require that interconnecting cables carrying high-speed data be shielded
appropriately to minimize radio frequency interference.
Supervisory
(SUPV) Port
The front panel supervisory (SUPV) port can serve
several functions. The unit’s terminal interface may
be accessed through this port (see Interface Start-up
on page 4-1) as well as the Call On Alarm feature on
page 4-23. This port may be accessed through either
a direct connection or a dial-up connection using an
AT-command-set-compatible modem. The modem
should be optioned to ignore DTR, enable auto
answer, inhibit command echo, and return verbose
result codes. Serial bit rates can be set from 1200 bps
to 19200 bps. Refer to Table 2-5 for the pinout and to
Figure 2-2 for typical terminal/modem cable
diagrams.
If the unit is called and sent the break command before receiving the connect message, the
modem hangs up
Table 2-4
High-Speed DTE Interface
Common Name
EIA-530
Backplane
EIA-530
DB-25
V.3 5
34-pin
Frame Ground 1 1 A
Transmit Data 2, 14 2, 14 P, S
Receive Data 3, 16 3, 16 R, T
Request to Send 4 4, 19 C
Clear to Send 5 5, 13 D
Data Set Ready 6 6, 22 E
Signal Ground 7 7 B
Data Carrier Detect 8 8, 10 F
Transmit Clock 15, 12 15, 12 Y, AA
Receive Clock 17, 9 17, 9 V, X
Local Loopback 18 18 J
Data Term Ready 20 20, 23 H
Remote Loopback 21 21 BB
Terminal Timing 24, 11 24, 11 U, W
Table 2-5
SUPV Port Pinout
Pin Signal
1DTR Out
2RTS Out
3 Frame Ground
4 Data Out
5 Data In
6 Signal Ground
7 CTS In
8DCD In
Vista de pagina 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 51 52

Comentarios a estos manuales

Sin comentarios