
Web Server Interface
The DHCP Details screen (
Figure 3.62) lets you configure the parameters
Figure 3.62
DHCP Details Screen
Enables or disables the DHCP Server. Default is “Enable.”
Defines the number of DHCP ports to be used. In this version, only “1” is a
Time to Live for any DHCP packet. Default is 64.
Type of Service used by the DHCP Server packet. Default is 1.
Tells the DHCP client the number of seconds it can retain this IP address. The
client should make a new DHCP request within the specified amount of time
to ensure the IP address is not given to another PC. Default is 600 seconds.
If requested by DHCP client, the client then uses this address to resolve
names of IP addresses. Default is 0.0.0.0.
If requested by DHCP client, the client then uses this secondary address to
resolve names of IP addresses. Default is 0.0.0.0.
Domain name to be used by all DHCP clients. Default is user’s server.
IP address that all clients use for Gateway or Router. Default is 0.0.0.0.
The DHCP Details screen provides the following user-activated buttons:
Sets any values that have been changed.
Lists Host names (DHCP server identification).
Creates a list of static IP addresses associated with MAC
Defines the addresses available for DHCP clients.
Comentarios a estos manuales