Verilink QPRI 2921 (880-503143-001) Product Manual Manual de usuario descargar pdf (Pagina 25)

Quick Set-Up

Verilink QPRI 2921 2-9

Figure 2-9 PRI Port Configuration Menu

2. Press

, then

NTER

, then

to put Port 1 in service. Press

then

NTER

, then

to put Port 2 in service.

3. For NFAS mode (If you want the increased bandwidth

capability from grouping the two lines together):

a. Activate NFAS by pressing

for Port 1. Select NFAS.

Since NFAS controls the other port as well, there’s no need to

configure both ports. The NFAS configuration will apply to

BOTH ports. (Port 1 is then the “controlling” port.)

b. Reboot the module by exiting all the way to the

Main

, selecting

to display the

Administration Menu

Figure 2-10. The card may also be rebooted by unseating it,

then reseating it. (Rebooting is required whenever the

NFAS setting is changed.)

Figure 2-10 NCM Controller Administration Menu (QPRI 2921 Card Administration Submenu)

A [127.255.255.0] [0,11] QPRI > p

A [127.255.255.0] [0,11] QPRI > pA [127.255.255.0] [0,11] QPRI > p

A [127.255.255.0] [0,11] QPRI > p

-- QPRI ISDN PORT CONFIGURATION MENU --

-- QPRI ISDN PORT CONFIGURATION MENU ---- QPRI ISDN PORT CONFIGURATION MENU --

-- QPRI ISDN PORT CONFIGURATION MENU --

PORT 1 PORT 2

PORT 1 PORT 2 PORT 1 PORT 2

PORT 1 PORT 2

In) PRI In Service No No

In) PRI In Service No NoIn) PRI In Service No No

In) PRI In Service No No

Fn) NFAS Mode No NFAS No NFAS

Fn) NFAS Mode No NFAS No NFASFn) NFAS Mode No NFAS No NFAS

Fn) NFAS Mode No NFAS No NFAS

Dn) D-Channel Mode Normal Normal

Dn) D-Channel Mode Normal NormalDn) D-Channel Mode Normal Normal

Dn) D-Channel Mode Normal Normal

Bn) D-Channel Bits 8 bits 8 bits

Bn) D-Channel Bits 8 bits 8 bitsBn) D-Channel Bits 8 bits 8 bits

Bn) D-Channel Bits 8 bits 8 bits

Sn) Switch Type DMS 100 DMS 100

Sn) Switch Type DMS 100 DMS 100Sn) Switch Type DMS 100 DMS 100

Sn) Switch Type DMS 100 DMS 100

Pn) Own Numbering Plan ISDN-E.164 ISDN-E.164

Pn) Own Numbering Plan ISDN-E.164 ISDN-E.164Pn) Own Numbering Plan ISDN-E.164 ISDN-E.164

Pn) Own Numbering Plan ISDN-E.164 ISDN-E.164

Nn) Own Numbering Type National National

Nn) Own Numbering Type National NationalNn) Own Numbering Type National National

Nn) Own Numbering Type National National

En) Security Level No checks No checks

En) Security Level No checks No checksEn) Security Level No checks No checks

En) Security Level No checks No checks

Ln) L2 auto establish No No

Ln) L2 auto establish No NoLn) L2 auto establish No No

Ln) L2 auto establish No No

X) exit this screen

X) exit this screenX) exit this screen

X) exit this screen

A [127.255.255.0] [0,11] QPRI >>

A [127.255.255.0] [0,11] QPRI >>A [127.255.255.0] [0,11] QPRI >>

A [127.255.255.0] [0,11] QPRI >>

[0.0.0.5] [1,2] QPRI 2921 > o

[0.0.0.5] [1,2] QPRI 2921 > o[0.0.0.5] [1,2] QPRI 2921 > o

[0.0.0.5] [1,2] QPRI 2921 > o

-- NCM CONTROLLER ADMINISTRATION MENU --

-- NCM CONTROLLER ADMINISTRATION MENU ---- NCM CONTROLLER ADMINISTRATION MENU --

-- NCM CONTROLLER ADMINISTRATION MENU --

Date/Time/Zone: 3-10-97 13:52:59

Date/Time/Zone: 3-10-97 13:52:59Date/Time/Zone: 3-10-97 13:52:59

Date/Time/Zone: 3-10-97 13:52:59

Node Address: [0.0.0.5]

Node Address: [0.0.0.5]Node Address: [0.0.0.5]

Node Address: [0.0.0.5]

Node ID: 1

Node ID: 1Node ID: 1

Node ID: 1

Site Name: TAC-LAB

Site Name: TAC-LABSite Name: TAC-LAB

Site Name: TAC-LAB

System Uptime: 4:03:03

System Uptime: 4:03:03System Uptime: 4:03:03

System Uptime: 4:03:03

--- QPRI 2921 -- Card Administration -- [01,02] ---

--- QPRI 2921 -- Card Administration -- [01,02] --- --- QPRI 2921 -- Card Administration -- [01,02] ---

--- QPRI 2921 -- Card Administration -- [01,02] ---

O) switch over permanent

O) switch over permanentO) switch over permanent

O) switch over permanent

Q) query firmware

Q) query firmwareQ) query firmware

Q) query firmware

R) reset card

R) reset cardR) reset card

R) reset card

Y) switch over once

Y) switch over onceY) switch over once

Y) switch over once

U) clear card configuration

U) clear card configurationU) clear card configuration

U) clear card configuration

X) exit this screen

X) exit this screenX) exit this screen

X) exit this screen

[0.0.0.5] [1,2] QPRI 2921 >

[0.0.0.5] [1,2] QPRI 2921 >[0.0.0.5] [1,2] QPRI 2921 >

[0.0.0.5] [1,2] QPRI 2921 >

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 84 85

Comentarios a estos manuales

Sin comentarios

Verilink QPRI 2921 (880-503143-001) Product Manual Manual de usuario Pagina 25

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Verilink QPRI 2921 (880-503143-001) Product Manual