Verilink PRISM 3101 (34-00212) Product Manual Manual de usuario Pagina 6

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 47
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 5
General 1-2
PRISM 3101/3102
D4 or ESF line framing, AMI or B8ZS line coding
Supports Fractional T1 services with flexible bandwidth allo-
cation
•S
LIP
RS-232 standard SNMP interface
Ethernet or Token Ring NIC for integral LAN (optional)
Specifications
Network Interface
Line Rate: 1.544 Mbps (± 50 ppm)
Line Framing: D4 or ESF
Line Code: AMI or B8ZS
Input Signal: 0 to -27 dB ALBO
Connection: RJ-48C jack, 100 (± 5%)
Output Signal: 3.0 V (±10%) base-peak into 100
with protection
Line Build Out: 0, -7.5, -15, -22.5 dB attenuation
Transient Voltage: 1000 V protection, fused input/output
Jitter Control: per TR62411 and T1.403
Timing Source: Internal, recovered line clock,
external DTE
Ones Density: B8ZS, Nx56 bit stuffing, alternate
fill; complies with TR62411
Equipment Interface
DTE Ports: 3101 single port and 3102 dual port
Compatibility: EIA530 (RS-422), female DB-25
CCITT V.35, female 34-pin
Data Rate: Synchronous, Nx56 kbps or
Nx64 kbps (where N = 1 to 24);
independent selection on each port
Clocking: Internal, External, Oversample
Data Invert: Independent selection on each port
Management Interfaces
Supervisory Port
Connection: 8-pin modular (RS-232)
Data Rates: 1.2, 2.4, 9.6, and 19.2 kbps
SLIP Port
Connection: 8-pin modular (RS-232)
Data Rates: 1.2, 2.4, 9.6, and 19.2 kbps
SNMP / TELNET Ethernet (optional)
Connection: 8-pin modular
Network Protocol: TCP/IP based networks
Data Rate: 10 Mbps
Compatibility: 10BASE-T
SNMP / TELNET Token Ring (optional)
Connection: 8-pin modular
Network Protocol: TCP/IP based networks
Data Rate: 4 or 16 Mbps
Compatibility: Type 3 unshielded twisted pair (UTP)
Diagnostics
Performance: Monitoring per TR54016 and T1.403
Network Loops: Line loopback, payload loopback, or
maintenance loopback in the network
direction
Fractional Loop: Responds to inband V.54 loop code
DTE Port Loops: Bidirectional loop toward DTE and Net
T1 DTE Loops: Line loop toward DTE
Maintenance loop toward DTE
BERT: Multiple test patterns toward network or
DTE ports
Alarms
Activation: Programmable thresholds
Reporting: Front panel LEDs, call out on alarm
(COA), SNMP TRAPs
Power
AC: 117 VAC, 0.12 A, 12 W maximum, 41
BTU maximum
DC: 24 VDC, 0.50 A, 12 W maximum, 41
BTU maximum
48 VDC, 0.25 A, 12 W maximum, 41
BTU maximum
Mechanical
Mounting: Desktop or horizontal rack
Dimensions: Width 12 inches (30.48 cm)
Height 1.75 inches (53.34 cm)
Depth 9 inches (22.86 cm)
Weight: 4 pounds (1.814 kg)
Environmental
Operating Temp: 32° to 122°F (0° to 50°C)
Storage Temp: -4° to 185°F (-20° to 85°C)
Humidity: 95% maximum (non-condensing)
Standards
TR62411: December 1990
TR54016: September 1989
ANSI T1.403: 1989
TR54019A: April 1988
Ethernet: ISO/IEC 8802-3
Token Ring: ISO/IEC 8802-5
Vista de pagina 5
1 2 3 4 5 6 7 8 9 10 11 ... 46 47

Comentarios a estos manuales

Sin comentarios